There are three levels on which you can configure the way the different outputs in the simulator file are modelled.
Default behaviour, all outputs modelled
If no Outputs tag is defined in the configuration file, all outputs are modelled and evaluated with the default CrossValidation and MinMax (see Measures) measure and target accuracy 0.001. Complex outputs modelled directly.
Default behaviour, selected outputs modelled
To change this default behaviour, one must specify an Outputs tag in the Run configuration. If you want to keep the default modelling behaviour of the toolbox (CrossValidation and MinMax, 0.001 accuracy), but you don't want to model each output, you only have to add an Output subelement for each output that you want modelled.
An example of such a configuration for the Academic2DTwice test function is:
<Outputs> <Output name="out" /> <Output name="outinverse" /> </Outputs>
Custom behaviour for each output
If you also want to change or fine-tune the behaviour of the toolbox for each output separately, you can add subelements to each Output tag to customize the toolbox for that particular output. This allows you to use different sample selectors and/or model builders for each output, change the default measure, or combine multiple measures.
Several examples of valid Output configurations can be found commented in default.xml.
Here is an example of an output configuration for the Academic2DTwice test function:
<Outputs> <Output name="out"> <SampleSelector>gradient</SampleSelector> <Measure type="CrossValidation" target=".0001" use="on" /> <AdaptiveModelBuilder>svm</AdaptiveModelBuilder> </Output> <Output name="outinverse"> <SampleSelector>grid</SampleSelector> <Measure type="CrossValidation" target=".05" use="on" /> <Measure type="MinMax" /> </Output> </Outputs>
This configuration models the first Output named "out" using the CrossValidation measure, but with increased target accuracy, and uses the gradient sample selector to select new samples. It builds models for this output using the svm model builder. The second output, named "outinverse", uses CrossValidation in combination with the MinMax measure, and uses the grid sample selector to select new samples for this output. It builds models using the model builder defined higher up in the xml hierarchy. As you can see, you can add multiple measures to one Output, so that each measure has something to say in deciding the accuracy of the models. However, you can only select one SampleSelector or AdaptiveModelBuilder.
If an Output element does not contain any Measure elements, that output is modelled using the default configuration, which is the CrossValidation measure and target accuracy 0.001.
For more information on how multiple measures are handled and the configuration options of each measure, see Measures.
by default, a complex output is treated as such and is passed in its original form to all the components of the toolbox. However, some components, do not support complex numbers directly and are therefore incompatible with the default setting.
The following components are at this moment incapable of handling complex outputs:
- Model builders using neural networks (annbatch, anngenetic, ...)
- Model builders using (LS)SVM (svmbatch, svmgenetic, lssvmgenetic, ...)
- Model builders using RBF neural networks (rbfnnbatch, rbfnngenetic, ...)
- Model builders using Splines (splines, splinesgenetic, ...)
In order to get these components to work with complex outputs, the outputs will have to be pre-processed. This is done by changing the complexHandling attribute of the Output. There are 3 valid values for this attribute:
- complex: Complex outputs are treated as is. Will not work with components in the aforementioned list.
- split: Complex numbers are split in real and imaginary parts, and each part is modelled separately. This means that two models will be built, and the toolbox will have twice the work it would normally have. Also any correlation between the real and imaginary part is lost.
- real: Only the real part of the complex number is modelled, the imaginary part is discarded.
- imaginary: Only the imaginary part of the complex number is modelled, the real part is discarded. The imaginary part is treated as one real output.
- modulus: The modulus of the complex number is modelled instead of the original number. Since the modulus is a real number, it can be modelled using all the components available.
A full-blown example for the InductivePosts test function that uses all the options mentioned in this article can be found below:
<!-- Model outputs S11 and S12 using the gradient sample selector (overwrites the beforementioned setting). Uses cross-validation for model evaluation. Both complex outputs are treated as two separate real numbers with no relation to each other, resulting in total in 4 reals that will be modelled for these two complex outputs. --> <Output name="S11,S12" complexHandling="real"> <SampleSelector>gradient</SampleSelector> <Measure type="CrossValidation" target=".01" /> </Output> <!-- Model output S12 as a complex number using the grid sample selector. Models are evaluated using the ValidationSet measure. The CrossValidation accuracy of the model is also calculated for comparison purposes, but isn't used in the modeling algorithm. --> <Output name="S12" complexHandling="complex"> <SampleSelector>error</SampleSelector> <AdaptiveModelBuilder>svmps</AdaptiveModelBuilder> <Measure type="ValidationSet" target=".05" /> <Measure type="CrossValidation" target=".05" use="off" /> </Output> <!-- Model the modulus of complex output S22 using cross-validation and the default model builder and sample selector. --> <Output name="S22" complexHandling="modulus"> <Measure type="CrossValidation" target=".05" /> </Output>